Home About us Products Models News Honor Network Contact us Substation
location:Home > Tripper Bend PulleyNews > Matching precision of self aligning ball bearing

Products
More models
Deep Groove Ball Bearing
KA Nylon Retainer Bearing
Deep Groove Ball Bearing
Black Chamfer lmported Process Bearing
35 Class Spherical Roller Bearing
36 Class Spherical Roller Bearing
Lightweight Spherical Roller Bearing
Self-Aligning Ball Bearing
One Way Backstop Bearing
Matching precision of self aligning ball bearing
Clicks:9860 Date:11-11
Measure the size of the shaft and bearing seat hole to determine the matching accuracy of the bearing, and meet the requirements as follows:
The inner ring and shaft adopt interference fit, the amount of interference of 0 ~ +4 m (in light load and high precision is 0); combined with the outer ring and the bearing hole by clearance, clearance of 0 ~ +6 ~ m (but bearing on the free end of the use of angular contact ball bearings, can also increase the gap); shaft and hole surface roundness error below 2 m, the end bearing ring parallel degree below 2 m, in the face of foreign shoulder end beating below 2 m; the bearing hole of the shoulder axis beating below 4 m; the front end face of the cover the axis of the beating below 4 M.
When the bearing is pressed into the INA bearing, it should be flexible and no block. If the rotation is not flexible, it shows that the size of the shaft is too large and the tolerance should be lowered. If the import bearing is pressed into the shaft, there is obvious "rustle" feeling by hand rotation, it may be that the shaft tolerance is too large or the shaft roundness is not good. Therefore, in the control of shaft and bearing room tolerance, but also to control the roundness, at present, many domestic manufacturers only tolerance control, there is no control of roundness.
Previous article: Self aligning ball bearing early damage mode      Next article: Fracture and defect of self aligning ball bearing parts
Recommended reading
How to repair the self aligning ball bearing overheating problem? 2018.1.15
Causes and maintenance measures that cause damage to self aligning bal 2017.12.23
Causes and treatment methods for oil leakage of self aligning ball bea 2018.1.4
Recommended products
bearing 6310 C4 for idler
bearing 6310 C4 for idler
bearing 6309 C4 for idler
bearing 6309 C4 for idler
bearing 6308 C4 for idler
bearing 6308 C4 for idler
bearing 6307 C4 for idler
bearing 6307 C4 for idler
 
Corporate Information
Home
Abouts Us
Products
News
Honors
Substation
 
Contacts
+86 635 5638235
Fax:+86 635 5638808
Address:Xu Village Industrial Garden, Gan Town, Guan County, Shandong
 
Follow us
 
Copyright © 2017 Shandong Xinkaite Bearing Co.,Ltd.